Untuk info lebih lanjut, Hub : 081220122100

The ICOM IC-2300H, 144MHz mobile, retains the same basic features from the popular IC-2200H; powerful 65W output power, simple-to-use user interface, built-in CTCSS and DTCS encoder/decoder, etc. While keeping those basic features, the IC-2300H is packed in to a smaller body (in depth) than the IC-2200H.

Output Power

65W, 25W, 10W, 5W

RX Frequencies:


Memory Channels:

207 (includes 6 scan edges & 1 call)

Simple Operation

The IC-2300H’s basic panel layout includes a simple user interface. A large LCD with 6 alphanumeric characters offers a good viewing angle for mobile operation. Select either the amber, yellow or green backlight color. The bottom of the display indicates the available front panel functions.

Built Tough

Rough roads won’t stop the IC-2300H from working. This mobile has been tested to and has passed the latest MIL-STD 810 G specifications including shock, vibration and temperature tests. The rugged aluminum diecast chassis provides effective heat dissipation and keeps RF output even during high duty cycle continuous transmission.

Multiple Scan Functions

The IC-2300H supports various scan types for maximum reception to suit your needs. The DMS (Dynamic Memory Scan) system allows you to scan selected banks from 10 memory banks by simply adding and deleting bank links.

Full scan

Programmed scan

Memory scan

Bank scan

Bank link scan (DMS)

Skip scan

Priority scan

Tone scan


Additional Features

Built-in CTCSS and DTCS encoder/decoder for quiet standby and repeater access

Power supply voltage display

4.5W (typical) loud audio

Reduced depth dimensions

DTMF autodial

Time-out timer



GeneralFrequency coverageTXRX144–148MHz136–174MHzModeF2D, F3ENo. of memory channels207 (including 6 scan edges and 1 call)Frequency resolution5, 6.25, 10, 12.5, 15, 20, 25, 30, 50kHzOperating temp. range–20°C to +60°C;

14°F to +140°F;

Frequency stability±3ppm (–10°C to +60°)Power supply requirement:13.8V DC ±15%Current drain (at 7.4V DC):

Transmit at 65W

Receive Stand-by

Receive Max. audio

11A0.4A1.5AAntenna impedance50Ω (SO-239)Dimensions (W×H×D)(projections not included)140×1.57×162 mm; 5.51×1.57×6.38 inWeight (approx.)1Kg; 2.43lbTransmitterModulation systemVariable ReactanceOutput power65/25/10/5WSpurious emissionsLess than –60dBc (High, Mid)Max. deviation±5.0/2.5 kHz wine/narrow)Microphone impedance60Ω (8-pin modular)ReceiverReceiver systemDouble superheterodyneIntermediate frequency 46.35MHz/450kHz (1st/2nd)SensitivityLess than 0.18μV at 12dB SINADSquelch SensitivityLess than 0.13μV at thresholdSelectivity



More than ±6kHz/6dBMore than ±14kHz/60dBMore than ±3kHz/6dBMore than ±9kHz/55dBSpurious rejection More than 60dBAudio Output Power4.5W (typ.)External speaker connector2-conductor 3.5(d) mm 1/8″/4Ω

Applicable U.S. Military Specifications

StandardMIL 810 GMethodProcedureLow Pressure500.5I, IIHigh Tempurature501.5I, IILow Tempurature502.5I, IITempurature Shock503.5I-BSolar Radiation505.5IVibration514.6IShock516.6I, IV

All stated specifications are subject to change without notice or obligation.

Supplied Accessories

Hand microphone, HM-133V

DC power cable, OPC-1132

Mounting bracket kit

Microphone hanger and spare fuses